How do you hook up subs to factory radio
Always be careful with electricity.
Should I be able to control the bass through the bass adjustment on the factory radio? The larger surface area will give you a little more kick. To make your speaker wire tester, simply take some speaker wire and electrical dating gibson les paul standard the positive wire to the positive post and the negative wire to the negative end of the matchmaking survey.
Introduction: Adding RCAs to a Standard Car Head Unit
Hope i have helped, Please comment. Not Helpful 13 Helpful I may have missed it somewhere. Next how do i connect the wires in any case?? Is it possible to just hook up a LOC to the rear factory sub and then just run the amp from there?
Subs and amps should be matched as closely as possible for best performance and longevity. Does it mean for me to attach the cables together by the wires, and then plug it in? Now for the Remote blue wire.
The factory speaker wires will not be labeled and will not be marked like typical aftermarket wiring harnesses. If it does, that would indicate possibly a poor ground for the amplifier.
Car Audio Defined By A Chick
Easiest way to improve a stock stereo system. Let me know what happened. Therefore when you adjust the bass going to your regular interior speakers, online dating avatar are also adjusting the signal going to the amp.
Your converter should come with wiring instructions so you will just need to match up the wires and splice them with the scotch blocks, use the pliers to press the metal splice bar so you can be sure of a good connection.
Step 1: Bits and Tools
See a local car audio dealer and they should be able to help you out without any problems. Most factory stereos including many premium models do not have a separate subwoofer control adjustment.
When connecting a line out connector to a factory head unit, it is advisable to use both sets of speaker wires to maintain the left and right stereo effect from modern music. What should I do if my ground wires are burning?
I decided to keep my standard head unit because it looks well in the car, is less likely to attract thieves than a shiny after-market unit and it is a factory upgraded unit anyway and i find it gives pretty good audio quality, it works with the steering wheel controls and has bluetooth and aux-in, so an after-market unit wouldn't offer a substantial upgrade. Detach the power cable from the battery and attach your amp's power wire to the power cable for your vehicle; leave it unattached.
Posted on Thursday, December 15, - It is very important to get the phase of the wiring how do you hook up subs to factory radio.
You should be able to connect it to the auxiliary on the back of the stereo unit. Sometimes you need to go before the amp, sometimes after.
Here's an example of one. Thanks in advance if you can help Frank.
By the way, it would sound way better with an aftermarket head unit, just an FYI.